.png){kind=logo}
اختبار إحكام الهواء في المباني (أو اختبار نفاذية الهواء للمباني)
%20(7).png)
%20(7).png)
Most clients focus on what they can see: the façade, the finishes, the HVAC equipment. But the performance of a building also depends on something invisible: how much air leaks through its envelope.
Every building has gaps: around windows and doors, at wall-to-roof junctions, through service penetrations, along curtain wall joints, and behind poorly sealed ducts. Together these gaps let conditioned air escape and let hot, dusty, humid outdoor air in.
The result is higher energy bills, oversized HVAC systems, uncomfortable spaces, and poorer indoor air quality (IAQ).
At SANA Engineering, we use building airtightness testing (also called a blower door test) and building envelope testing to find these problems, measure them, and fix them. This article explains what the tests are, how they work, how they apply to real projects, and the equipment behind them.
1. What Is a Building Airtightness Test?
A building airtightness test measures how much air leaks through the building envelope at a standard test pressure, usually 50 Pascals (Pa).
A powerful calibrated fan is mounted in an exterior doorway and used to pressurize or depressurize the building. Once a steady pressure difference is established, the fan airflow needed to hold that pressure equals the airflow leaking through the envelope.
The more air the fan must move, the leakier the building.Testing at 50 Pa is a convention. It is high enough to overcome wind and stack-effect noise, so results are repeatable and comparable between buildings.
2. What Is a Building Envelope Test?
The building envelope is the physical barrier between inside and outside: walls, roof, floor slab, windows, doors, curtain wall, and all the joints between them.Envelope testing is broader than the airtightness number alone. It combines:
•Airtightness (blower door) testing to quantify total leakage.
•Leak detection using smoke tracing to locate leaks visually.
•Thermal imaging (infrared) to reveal insulation gaps, thermal bridges, and air paths.
•Pressure mapping and compartmentalization tests to check leakage between zones, floors, apartments, and shafts.
•Duct leakage testing (where required) to check that air is delivered where it should be.
The airtightness test tells you how bad the leakage is. The rest of the envelope test tells you where and why, which is what lets you fix it.
اختبار إحكام الهواء في المباني (أو اختبار نفاذية الهواء للمباني)
3. How Building Envelope Test is Applied on Projects
Airtightness testing is not only for finished buildings. It adds the most value when it is planned across the project lifecycle:
•Design stage: Set an airtightness target, identify the air barrier line, and review key junctions (roof-to-wall, window-to-wall, penetrations).
•During construction (pre-finish test): Test once the air barrier is complete but before ceilings and finishes hide it. Leaks found now cost a fraction of what they cost later.
•Completion / handover test: Verify that the building meets the specified target, and issue a certified report for the client, consultant, or authority.
•Existing buildings and retrofits: Establish a baseline, find leakage paths, and measure improvement after upgrades.
Typical project types:
residential villas and compounds, apartment towers, offices, schools, hospitals, hotels, warehouses, cold stores, cleanrooms, data centers, and mosques.For large buildings, we use several fans operating together, or test floor by floor or zone by zone, so the results stay meaningful.
4. The Building Envelope Test Procedure (Retrotec Method)
We follow the Retrotec methodology, which aligns with international standards such as ASTM E779, ASTM E1827, ISO 9972, and related national standards.
The main steps are:
Step 1: Define the test boundary
Step 2: Prepare the building
Step 3: Install the blower door
Step 4: Connect the gaugeStep 5: Measure baseline pressure
Step 6: Run the multi-point test
Step 7: Analyze results
Step 8: Find the leaksStep
9: Report and fix
5. The Equipment: The Complete Retrotec Test Set
A good test depends on good equipment. Our setup is built around the Retrotec system.
Blower Door SystemsRetrotec’s airtightness testing systems cover everything from single-family homes to large commercial
buildings.
A complete system includes:
•Calibrated fan: a high-performance axial fan with flow rings or plates that let the operator match the fan to the leakage level. Larger fan models are used for commercial buildings, and multiple fans can be used together on very large projects.
•Adjustable door frame: fits a wide range of door sizes.
•SmartCloth panel: a durable fabric panel that seals the doorway and holds the fan, quick to install and pack away.
•Fan speed control: holds the building at precise target pressures.•Hoses and fittings: connect the system to the gauge.
Digital Manometer
The Digital Manometer is the brain of the system.It is a handheld, touchscreen gauge that:
•Measures building pressure and fan flow at the same time.
•Displays live pressure (Pa).
•Shows the fan model, flow range, and fan speed.
•Supports auto-seek to bring the building to the target pressure automatically.
•Lets the operator set the averaging time, hold readings, and graph results.
•Connects to test software for reporting.
AirTracer Smoke Generator
Numbers tell you the building leaks. The AirTracer shows you where. It is a handheld smoke generator that produces a safe, visible smoke stream.
Supporting Tools
•Thermal imaging camera
•Duct testing equipment
•Test and reporting software
6. Why Work with SANA Engineering
•Experienced engineers and trained test technicians
•Professional, calibrated Retrotec equipment
•Testing to recognized international standards
•Clear reports with practical, prioritised recommendations
•Support at every stage: design review, construction-stage testing, handover verification, and retrofit assessmentWhether you are building a new project or improving an existing one, we can help you measure performance, find the problem, and fix it.
Contact SANA Engineering to discuss a building airtightness or envelope test for your project.